Towable TMR Mixer

This machine integrates advanced welding technologies from both domestic and international sources, is equipped with the same type of reducer from a renowned imported brand, and features an imported weighing system. It uses high-quality feed grinder blades and a housing made from wear-resistant plates, ensuring exceptional sharpness and wear resistance, long service life, rapid mixing speed, high chopping efficiency, excellent uniformity, and significant time- and labor-saving benefits. It boasts robust cutting, mixing, and shredding capabilities, offers excellent palatability, can boost milk production, and leads to noticeable weight gain.

This machine draws on the strengths of similar products both domestically and internationally. After numerous rounds of repeated optimization and design testing, it has demonstrated stable and highly efficient performance. It is well-suited to China’s feeding practices, which primarily rely on forage materials such as straw and alfalfa, thereby reducing feed costs and enhancing the utilization rate of feed nutrients—yielding remarkable results.

Maintenance of Vertical Total Mixed Ration Feed Preparation Machines

I. Reducer Maintenance:

For the new machine, replace the reducer lubricant every 3 months; thereafter, replace the reducer oil annually. Each reducer uses 24 kilograms of L-AN46 total-loss system oil.

II. Inspect the blade:

Check the wear condition of the moving blades on the tower core. If the blades are dull, immediately sharpen or replace them.

3. Bearing Lubrication:

The spindle bearing housing needs to be lubricated with grease once every half month. Note: The bearing oil passages are very narrow. If the bearings are left unlubricated for an extended period, the oil in the passages will dry up, making it impossible to inject more grease later on.

IV. Hydraulic System Maintenance:

Regularly check whether the oil pipe fittings and fasteners are loose to prevent leaks and detachment. Replace approximately 6 liters of L-HV46 low-temperature anti-wear hydraulic oil annually. (In winter, ordinary hydraulic oil tends to freeze, and if the hydraulic oil freezes, the hydraulic pump will fail to operate.)

V. Special Attention:

Before starting work, briefly activate the switch and check whether the tower core’s rotation direction matches the indicated direction. If the rotation direction does not match the label, reverse the connection sequence of the main power supply lines. Start the feed mixer and run it under no-load conditions for 2–3 minutes to ensure that all equipment functions properly before beginning the feeding process. (If the rotation direction is reversed, the tower core may become jammed, potentially damaging the tower core blades or the gearbox. Pay special attention: Before restarting the machine after a power outage, be sure to confirm that the rotation direction is correct before adding feed.) Each shift, check that the gearbox oil reservoir for the tower core contains at least half a tank of oil. A low oil level in the reservoir could lead to damage of the gearbox.